Full Body Belt (Harness)

Full Body Harness

Engineered for linemen, tower technicians, and rope access professionals, this full body harness provides comprehensive fall protection and work positioning capabilities for all work-at-height scenarios. Unlike half-body belts, the full body harness distributes fall arrest forces across the shoulders, chest, legs, and pelvis, significantly reducing the risk of injury during a fall event. The harness is ideal for tower climbing, wind turbine maintenance, bridge work, construction, and any application where a fall hazard exists. The high-tenacity nylon webbing (polyester core) forms the structural backbone, with load-rated stitching (minimum 5,000 lb tensile) at all stress points. Padded shoulder straps (15mm closed-cell foam) and leg straps (10mm foam) provide all-day comfort without restricting movement. A dorsal (rear) D-ring serves as the primary fall arrest attachment point, while sternal (chest) and side D-rings enable work positioning and ladder climbing. Quick-connect buckles (aluminum or steel) on the chest and legs allow for rapid donning and doffing, even while wearing gloves. The harness includes multiple adjustable straps for a custom fit across a wide range of body sizes, and adjustable lanyard keepers manage excess webbing. Meets or exceeds OSHA 1926.502, ANSI Z359.11, and CSA Z259.10 standards for full body harnesses. Optional load indicators on the dorsal D-ring provide visual confirmation of fall impact, signaling when the harness must be removed from service.

• Material: High-tenacity nylon webbing (polyester core, 44mm width, 5,000+ lb tensile strength)
• Weight Capacity: 140–190 kg (310–420 lbs) — meets ANSI Z359.11 Class A (fall arrest) or Class P (pole climbing)
• D-rings: 1 dorsal (rear, fall arrest, 45kN rated), 1 sternal (chest, ladder climbing), 2 side (positioning)
• Buckles: Quick-connect (aluminum or steel) on chest and legs; tongue-style on shoulders and waist
• Padding: Shoulder (15mm EVA foam), leg (10mm EVA foam), waist (10mm foam) — breathable mesh cover
• Attachment Points: Front and rear webbing loops for tool lanyards, suspension trauma relief straps (optional)
• Adjustability: Shoulder straps (sliding back adjustment), leg straps (quick-connect), waist belt (side pull)
• Standards: OSHA 1926.502, ANSI Z359.11-2014 (Class A or P), CSA Z259.10-18, EN 361:2002
• Sub-pelvic Strap: Yes — prevents rider-up effect during vertical suspension
• Fall Indicator: Optional dorsal D-ring impact indicator (visual red flag after 450 lbf fall arrest)
• Application: Tower climbing, wind turbine access, bridge work, construction, rope access, rescue operations