Cat6 to VGA Console Cable
Back
Product Overview
The Cat6 to VGA console cable (often sold as a VGA over Cat6 balun set) allows VGA video signals (analog RGB + H/V sync) to be transmitted over standard Cat6 unshielded twisted pair cabling for distances up to 100-300 meters, far exceeding the 15-30 meter limit of standard VGA cables. The system typically consists of a transmitter (VGA input, RJ45 output) and a receiver (RJ45 input, VGA output), connected by a single Cat6 cable. Some integrated cables have the balun circuitry molded into the VGA connectors.
Reviews
Product Details
Cat6 to VGA Console Cable
The Cat6 to VGA console cable (often sold as a VGA over Cat6 balun set) allows VGA video signals (analog RGB + H/V sync) to be transmitted over standard Cat6 unshielded twisted pair cabling for distances up to 100-300 meters, far exceeding the 15-30 meter limit of standard VGA cables. The system typically consists of a transmitter (VGA input, RJ45 output) and a receiver (RJ45 input, VGA output), connected by a single Cat6 cable. Some integrated cables have the balun circuitry molded into the VGA connectors. This solution is ideal for extending computer displays to projectors, digital signage, conference room displays, and classroom monitors where VGA sources are still used. The Cat6 cable's twisted pair construction provides excellent common-mode rejection, reducing noise and ghosting. Supports resolutions up to 1080p (1920x1080) or 1920x1200 depending on quality. Passive baluns (no external power) work up to 100m; active baluns (powered) can reach 300m+. The cable does not carry audio — separate audio extension required.
- Product Type: VGA over Cat6 balun (transmitter + receiver set) or integrated cable with molded baluns
- Connectors: VGA male (15-pin HD D-sub) to RJ45 (Cat6) on each end
- Maximum Distance: Passive: 100 meters (328 ft); Active (powered): 300 meters (984 ft)
- Supported Resolution: Up to 1920x1080 (1080p) or 1920x1200 (60Hz) depending on cable quality and distance
- Signal Type: Analog RGB (red, green, blue) + horizontal sync + vertical sync
- Power: Passive models (no power required); Active models require 5V DC (USB or included adapter)
- Audio Support: No — video only (use separate audio extender for sound)
- Cat6 Cable Requirements: Solid copper, 23-24 AWG, 100 ohm impedance, shielded (STP) recommended for long runs
- Applications: Conference room displays, classroom projectors, digital signage, industrial monitors, extending computer VGA output
- Advantages: Lower cost than active fiber extenders, uses standard network cabling, eliminates thick VGA cables
Add a review
Rate this product
Related Products
